Register Login ##{$loggedInUsername}##
 
  Język Polski   English
baner

Advanced filters
 

Search Results

Application of micro-thermal analysis for polymeric materials investigations
M. El Fray   
793-800
2022-09-18

Dynamic mechanical analysis and thermal analysis of untreated Coccinia indica fiber composites
S. Balu    P. S. Sampath    M. Bhuvaneshwaran    G. Chandrasekar    A. Karthik    Suresh Sagadevan   
357-362
2020-12-15

Application of cax tools in the design of injection molds
J. Ziobro    A. Marciniec   
877-882
2010-12-30

Gamma-induced grafting of rice straw cellulose with polyvinylpyrrolidone
Dr. Meri Suhartini    Zetryana Puteri Tachrim, Ph.D    Niken Hayudanti Anggarini    Rahmawati Rahmawati    Amanda Prasetyani    June Melawati    Deswita Deswita    Bambang Sugeng   
450-456
2022-10-26

Compatibilized ethylene-propylene-diene terpolymer nanocomposites containing different type of organoclays
A. Malas    C. K. Das   
204-211
2013-03-30

Application of life cycle assessment and exergy to environmental evaluation of selected polymers
K. Czaplicka-Kolarz    D. Burchart-Korol    J. Korol   
605-609
2013-08-30

Involvement of hybrid materials based on natural clay and poly(vinyl chloride) into extraction of metal cations
B. Chrayet    F. Ammari    F. Meganem   
187-192
2021-01-15

New method of analysis of the surface free energy of polymeric materials calculated with Owens-Wendt and Neumann methods
M. Żenkiewicz   
584-587
2022-08-30

Finite element analysis of three-point bending of a T-beam structural biaxial highly oriented polymer material
C.-L. Wei    Y. Chang    Y.-C. Lee    R. Lee    T.-W. Luo    J.-H. Chen   
219-223
2021-01-13

The systemic analysis of injection moulding
I. Catic    M. Rujnic-Sokele   
15-21
2022-09-18

The analysis of principal conditions of van Oss-Chaunhury-Good's method in investigations of surface layers of polymeric materials
M. Żenkiewicz   
169-176
2022-08-30

Dendrimeric peptide – montmorillonite intercalation compound
M. Kędzierski    J. Janiszewska    I. Moszumańska   
677-682
2021-01-24

Physicochemical and mechanical properties of natural cellulosic fiber from Coccinia Indica and its epoxy composites
M. Bhuvaneshwaran    P. S. Sampath    S. Balu    S. Sagadevan   
656-664
2021-01-12

Analysis of plastics packaging domestic market
B. Czerniawski   
811-819
2022-08-26

Geometric analysis of plasticizing system in the extruder consisting of two cone worms
P. Boral    T. Nieszporek   
571-576
2012-08-30

Analysis of shrinkage stresses arising during polymerization of orthodontic adhesive systems
Konrad Małkiewicz    Michał Krasowski    Jakub Bartczak    Marta Radziejewska    Kinga Bociong   
269-275
2023-08-21

Thermal analysis of a sodium salt of the maleic acid-acrylic acid copolymer used as a polymeric binder
B. Grabowska    M. Holtzer    M. Eichholz    K. Hodor    A. Bobrowski   
151-155
2011-02-28

Functional groups grafted on poly(vinyl chloride) – evaluation of new modified polymers in metal ions adsorption
F. Mbarki    F. Ammari    A. B. H. Amor    F. Meganem   
109-117
2021-01-15

Application of the X-ray micro-computed tomography to the analysis of the structure of polymeric materials
Piotr P. Szewczykowski    Łukasz Skarżyński   
12-22
2021-01-12

Characteristics of high-density polyethylene and its properties simulation with use of finite element method
T. Klepka    H. Dębski    H. Rydarowski   
668-672
2022-08-18

Adhesion between orthodontic bracket and dental ceramics
Konrad Malkiewicz    Michał Krasowski    Jakub Bartczak    Marta Radziejewska    Anna Janas-Naze    Estera Horodyska   
371-377
2023-10-05

Heterogeneous pores distribution in polyurethane expanding foams detected via X-ray computed microtomography
A. Blażejczyk    P. Wierzbicka   
685-693
2021-01-13

Analysis of stress distribution and crack development and propagation of poly(methyl methacrylate) after the use in human body
A. Szarek    D. Kwiatkowski   
740-746
2012-10-30

Homo- and copolymerization of 2-benzothiazoylacrylamide with α-methyl styrene and methyl acrylate: synthesis, characterization and reactivity

Ali M.A. Abdul Amir Al-Mokaram    Ameen Hadi Mohammed    Hiba Ahmed Ghani   
489-496
2022-11-04

Some directions of polydimethylsiloxanes applications and possibilities of these compounds analyses
K. Mojsiewicz-Pieńkowska    J. Łukasiak   
186-191
2022-08-30

Filling the production gap in the Polish chemical industry – industrial scale production of acrylic acid and acrylates
J. Kijeński    A. Migdał    P. Rejewski    A. Kędziora   
702-709
2021-01-24

A literature survey of the influence of preform reheating and stretch blow molding with hot mold process parameters on the properties of PET containers Part II
Paweł Wawrzyniak    Waldemar Karaszewski   
437-448
2020-12-16

The influence of cyclization and crosslinking on the properties and networks of photoinitiated multifunctional methacrylate polimers derived from succinic anhydride and their copolimers with styrene
M. Podgórski    J. Księżopolski    E. Chmielewska   
277-283
2010-04-30

Effect of the content of rigid segments on the properties of polycarbonate urethanes for use in intervertebral disc implants
M. Auguścik    B. Waśniewski    M. Krzyżowska    J. Dąbrowski    J. Ryszkowska    W. Karalus   
551-558
2015-09-30

Preparation of block copolymers by controlled radical polymerization of acrylamide with functionalized poly(ethylene oxide) as macroinitiator
M. Bednarek    T. Biedroń    P. Kubisa   
664-673
2022-09-21

Changes in structure of dibutyrylchitin fibres in the process of chitin regeneration
D. Biniaś    A. Włochowicz    S. Boryniec    W. Biniaś   
742-747
2022-09-01

Effect of maleated linear low density polyethylene on the structure and mechanical properties of terpolymer acrylonitryle-butadiene-styrene based blend wastes
R. Jeziórska    A. Szadkowska    A. Abramowicz   
705-713
2012-10-30

Thermal degradation behavior of cellulose-based material for gating systems in iron casting production
B. Grabowska    M. Szucki    J. S. Suchy    S. Eichholz    K. Hodor   
39-44
2013-01-30

Structural analysis of the extruder screw plasticizing system
J. Flizikowski    J. Sadkiewicz   
402-410
2015-06-30

Polymeric superplasticizers based on polycarboxylates for ready-mixed concrete: current state of the art
D. Wiliński    P. Łukowski    G. Rokicki   
474-481
2021-01-24

Synthesis and characterization of binary complexes of furcellaran with gelatin and bovine serum albumin
E. Jamróz    A. Konieczna-Molenda    A. Para   
416-423
2021-01-13

Methods of forecasting of the changes of polymeric products properties
T. Jachowicz    R. Sikora   
177-185
2022-08-30

Setting priorities in plastic waste management - lessons learned from material flow analysis in Austria and Poland
R. Bogucka    I. Kosińska    P. H. Brunner   
55-59
2022-08-23

Molecularly imprinted polymers in pharmaceutical sciences. Part II. Applications in pharmaceutical analysis
P. Luliński   
3-10
2011-01-30

Synthesis, characterization, thermal and electrochemical properties of imine polymers containing pyridine and pyrimidine units
H. Karaer    I. Kaya    H. Aydın   
170-180
2021-01-15

Analysis of mechanical properties and distribution of deformation during the shear of polymer-fiber composites containing flame retardants
Rafał Oliwa    Katarzyna Bulanda    Mariusz Oleksy    Grzegorz Budzik    Sławomir Krauze   
387-393
2020-12-15

Multistage mass spectrometry studies on the chemical structure of aliphatic polyester macromolecules
G. Adamus    M. Kowalczuk   
501-510
2022-09-19

Physical structure and topology of elastomers networks
W. M. Rzymski    B. Wolska   
246-253
2022-09-17

Syntheses, structures and properties of novel oligo(azomethine ether)s containing or not chlorine atoms in the main chain
I. Kaya    S. Çulhaoglu   
266-273
2009-04-20

Evaluation of cracking conditions for butt-welded joints of polyethylene pipes
W. Baranowski    K. Werner    M. Kula   
747-753
2014-10-30

Prediction of air permeability and effective thermal conductivity of multifilament polyester yarn by finite element analysis

Muhammad Owais Raza Siddiqui    Salma Farooq    Muhammad Dawood Husain    Saira Faisal   
6-18
2023-02-23

Copolymerization of dodecyl methacrylate with oxyethylene glycol dimethacrylates: determination of reactivity ratios
E. Socha    E. Andrzejewska    M. Andrzejewski    M.B. Bogacki    K. Bielicka-Daszkiewicz   
356-358
2022-09-01

Synthesis of a novel phosphorus-containing polysiloxane and its use as the modifier of thermal properties of an epoxy resin
M. Hou    W. Liu    Q. Su    Y. Liu   
836-840
2022-08-26

Plant fibers as alternatives to mineral fillers in thermoplastic composites – Ford's vision or Al Gore's?
J. Kijeński    M. Kijeńska    O. Osawaru   
467-473
2021-01-24

Analysis of thermomechanical properties and morphology of polyethylene pipes after aging by UV radiation
A. Gnatowski    M Chyra    W. Baranowski   
308-313
2014-04-30

The use of chemically modified PVC waste to remove ions from wastewater
Abid Ouerghui    Faycel Ammari    Christian Girard   
801-806
2020-12-17

Curing of epoxy resin epidian® 6 containing reactive organosilicon filler — a differential scanning calorimetry study
B. Mossety-Leszczak    P. Ostyńska    M. Dutkiewicz    H. Maciejewski    H. Galina   
212-218
2013-03-30

Autocatalytic metallization of polylactide
K. Moraczewski    R. Malinowski    P. Rytlewski    M. Żenkiewicz   
492-500
2015-08-30

Preparation and characterization of poly(urea-urethane) elastomers synthetized from rapeseed oil-based polyols. Part II. Thermal properties
J. Ryszkowska    M. Auguścik    M. Kurańska    R. Oliwa    J. Czech-Polak    A. Prociak   
136-143
2021-01-15

Methods of analysis of poly(aspartic acid) and its derivatives
E. Tylek    J. Polaczek    J. Pielichowski   
341-345
2022-09-01

Effect of POSS on morphology, thermal and mechanical properties of polyamide 6
R. Jeziórska    B. Świerz-Motysia    A. Szadkowska    B. Marciniec    H. Maciejewski    M. Dutkiewicz    I. Leszczyńska   
809-816
2011-12-30

Investigation of Fe304/AEAP supermagnetic nanoparticles on the morphological, thermal and magnetite behavior of polyurethane rigid foam nanocomposites
M. M. A. Nikje    M. Noruzian    S. T. Moghaddam   
26-32
2015-01-30

Possibility of using polyamide 6 reinforced with glass fiber for Ilizarov rings
C. Cossard    S. Kuciel    S. Mazurkiewicz    A. Liber-Kneć   
317-320
2022-08-23

Rigid polyurethane foam composites with vegetable filler for application in the cosmetics industry
M. Zieleniewska    L. Szczepkowski    M. Krzyżowska    M. Leszczyński    J. Ryszkowska   
807-814
2021-01-24

Innovative oligomeric poly(vinyl chloride) plasticizers for specialized applications
Marek Lewandowski    Kazimierz Piszczek    Marta Pieńkowska    Krzysztof Lewandowski   
550-556
2020-12-16

Thermal characterization of polymer composites with nanocrystalline maghemite
M. Maryniak    N. Guskos    J. Typek    D. Petridis    A. Szymczyk    A. Guskos    K. Goracy    Z. Rosłaniec    M. Kwiatkowska   
546-551
2022-08-18

The complementary structural studies of the double metal cyanide type catalysts for the ring opening polymerization of the oxiranes
A. Chruściel    W. Hreczuch    K. Czaja    K. Ławniczak-Jabłońska    J. Janik   
421-432
2021-01-24

Effect of wood flour addition and modification of its surface on the properties of rotationally molded polypropylene composites
M. Barczewski    M. Szostak    D. Nowak    A. Piasecki   
772-784
2021-01-13

The geometric accuracy analysis of polymer spiral bevel gears carried out in a measurement system based on the Industry 4.0 structure
Jadwiga Pisula   
353-360
2021-01-12

Analysis of the influence of zinc stannates and keratin powder on the flammability properties of epoxy material
M. Półka    B. Kukfisz    A. Kulik   
764-771
2021-01-15

The effect of the heat treatment on the crosslinking of epoxy resin for aviation applications
Mateusz Mucha    Tomasz Sterzyński    Aneta Krzyżak   
776-783
2020-12-17

Shrinkage of moldings and injection molding conditions
P. Postawa   
201-207
2022-09-01

Polycarbonate urethane nanocomposites with nanosilica for implants of the intervertebral disc
B. Waśniewski    M. Auguścik    P. Parzuchowski    M. Zielecka    J. Ryszkowska   
812-818
2012-12-30

Numerical simulation and experimental validation of residual stress induced constrained shrinkage of injection molded parts
T. Azdast    A. H. Behravesh    K. Mazaheri   
304-310
2022-08-23

Effect of vitrification on the curing reaction of EPY® epoxy system
M. Urbaniak   
394-397
2021-01-15

Aerogels from polypyrrole/carbon nanotubes-based polymeric blends
René Salgado-Delgado    Efraín Rubio-Rosas    Juan B. Hernández-Zaragoza    Teresa López-Lara    Apolonio Vargas-Torres    Zully Vargas-Galarza    Juan Carlos Ochoa-Jaimes    Alfredo Olarte-Paredes    Areli M. Salgado-Delgado    Victor M Castaño   
516-522
2020-12-16

Metal complexes of poly(iminoethylene) modified with dithiocarbamate and poly(iminoethylene) compounded with montmorillonite as flame retardant systems for polypropylene
M. A. Nour   
439-442
2022-09-17

Unconventional crosslinking of the blends of chlorosulfonated polyethylene and carboxylated acrylonitrile-butadiene rubber
M. Kozioł    W. M. Rzymski   
587-592
2022-09-01

Analysis of the most important methods of investigations of polymeric materials surface free energy
M. Żenkiewicz   
760-767
2022-08-26

Rheological studies of highly-filled polyolefinic composites taking into consideration p-v-T characteristics
P. Jakubowska    T. Sterzyński    B. Samujło   
379-389
2010-05-30

Wpływ oddziaływania strefy tarczowej wytłaczarki ślimakowo-tarczowej na strukturę i właściwości wytłoczyny z polietylenu małej gęstości (PE-LD)
I. Michalska-Pożoga    J. Diakun   
845-850
2014-12-30

Influence of flame-retardant additives based on Sb2O3 on PVC flammability
Sergiy Kurta    Olga Shevchenko     Olga Khatsevich     Sofia Fedorchenko    Volodymyr Riy    Solomia Givel   
226-233
2023-06-16

The influence of the chamber temperature in the Brabender measuring mixer on the state of equilibrium of the torque of rigid poly(vinyl chloride)
J. Tomaszewska    T. Sterzyński    K. Piszczek   
678-680
2022-08-23

The effect of plasticizers and chitosan concentration on the structure and properties of Gracilaria sp.-based thin films for food packaging purpose
M. Zulham Efendi Sinaga    Saharman Gea    Cut Fatimah Zuhra    Yuan Alfinsyah Sihombing    Emma Zaidar    Firman Sebayang    Tya Utari Ningsih   
2021-02-17

Multifactorial analysis of poly(vinyl chloride) gelation
J. Tomaszewska   
42-47
2022-08-30

Syntheses, chemical strustures and properties of poly(ester-etherurethane)s crosslinked with styrene, synthesized from unsaturated oligo(alkylene ester-ether)diols and 4,4'-diphenylmethane diisocyanate
J. Kucińska-Lipka    H. Janik    A. Balas   
781-785
2022-08-18

Synthesis, characterization, thermal and fire retardant properties of new homo- and block copolymers of polyacrylate and epoxy resin with cyclotriphosphazene core
Alaa Shaban    Salah Mahdi Al-Shukri    Hussein Ismail Kahlaf    Othman A. Al Hanbali   
577-590
2021-01-12

Sensory and instrumental (GC/MS) evaluation of food packaging quality
W. Sarzyński    J. Jaszczyński   
261-267
2022-09-19

Aminated PVC cross-linked with 2,2’-dichlorodiethyl ether as heavy metal absorber
Adnen Mabrouki    Fayçel Bouzayene    Soltani Awatef    Fayçel Ammari   
603-608
2023-01-11

Shape memory properties of poly(methyl methacrylate-co--2-hydroxyethyl methacrylate)/poly(ethylene glycol) complexes
G. Liu    D. Xie    Y. Li    Y. Zhang    F. Huang   
304-307
2013-04-30

Synthesis and monomer reactivity ratios of acrylamide with 3-(trimethoxysilyl)propyl methacrylate and tris(methoxyethoxy)vinylsilane copolymers
A. H. Mohammed    M. B. Ahmad    N. A. Ibrahim    N. Zainuddin   
758-765
2021-01-24

Insight into protein dynamics from nuclear magnetic relaxation studies
A. Ejchart   
745-751
2022-08-26

Use of in situ generated Lewis acids in crosslinking of elastomers
B. Wolska    W.M. Rzymski   
514-521
2022-09-01

Preparation and characterization of attapulgite microcapsules coated with acrylic polymer
Lining Song    Zhenxu Li    Lina Yang    Ning Wang    Jie Zhao    Zheng Gu   
112-118
2021-02-17

Pyrolysis gas chromatography and its new possibilites in the analysis of polymers
J. Hetper   
751-758
2022-09-21

Polyetherols with purine ring
J. Lubczak   
805-811
2022-09-01

Supermolecular structure, morphology and physical properties of urea-urethane elastomers
J. Ryszkowska   
777-785
2012-12-30

Synthesis, characterization and thermal polymerization of new 3,4-dihydro-2H-1,3-naphthoxazine monomers
A. U. G. Gabbas    M. B. H. Ahmad    N. Zainuddin    N. A. Ibrahim   
86-92
2021-01-15

X-ray scattering and calorimetric studies of organoclays obtained by ion-exchange
A. Kiersnowski    M. Trelińska-Wlaźlak    M. Gazińska    J. Pigłowski   
671-675
2011-09-30

Effect of addition of expanded graphite (EG) on the synthesis and characteristics of poly(ethylene terephthalate) modified with cyclohexanedimethanol (PETG)
S Paszkiewicz    A Szymczyk    Z Špitalský    J Mosnáček    E Janus    Z Rosłaniec   
893-899
2013-12-30

Spiro-cyclotriphosphazene with three functional end groups: synthesis and structural characterization of new polycyclotriphosphazenes with Schiff-base groups
Salah Al-Shukri    Ayad Tarik     Othman A. Al Hanbali   
341-349
2021-07-27

Synthesis of new polymers containing 1,2,3-triazole units from poly(vinylchloride) via "click” chemistry catalyzed by copper iodide and its application in extraction of nitrates and metals contained in wastewater
Abid Ouerghui    Mokthar Dardouri    Noomene Sleimi    Abir Bel Hadj Amor    Faycel Ammari    Christian Girard   
3-11
2021-01-12

Analysis of the influence of selected Slicer parameters on the mapping accuracy in the FFF method
Grzegorz Budzik    Małgorzata Zaborniak    jakubroczniak   
483-488
2022-10-24

Application of computer-aided analysis of an image for assessment of reinforced polymers structures
A. Gądek    S. Kuciel    L. Wojnar    W. Dziadur   
206-211
2022-08-30

Analysis of metals content in polyethylene packaging materials in view of the existing legislation
D. Kolasa    A. Bajszczak    A. Łukomska    J. Dłubak    Z. Rogulski    S. Kowalska    A. Czerwiński   
98-105
2021-01-24

Use of rapid prototyping technology in complex plastic structures Part II. Impact of operating conditions on functional properties of polymer harmonic drives
Jacek Pacana    Rafał Oliwa   
216-223
2021-01-12

Analysis of the selected heavy metals content in the lead-acid battery polymeric separator
Dorota Kolasa    Aneta Łukomska    Joanna Sołtysiak    Michał Soszko    Olga Ciężarek    Jakub Lach    Kamil Wróbel    Andrzej Czerwiński   
442-451
2021-01-12

A preliminary study on the new thermoplastic vulcanizates
B. Świerz-Motysia    B. Jurkiewicz    M. Rajkiewicz   
203-209
2022-08-26

Prediction of cohesion energy of polymers using topological indices
J. Xu    B. Chen    H. Liang    W. Xu    W. Cui   
19-25
2009-01-10

Syntheses and characterizations of multifunctional polyphenols derived from dihydroxyphenylene-based Schiff bases
Î. Kaya    Ş Keskin   
883-892
2013-12-30

The geometrical and kinematical analysis of the flow of polymer through the screw-based plasticating system
R. Sikora    E. Sasimowski   
117-121
2022-09-18

Study on the influence of mineral powder fillers modification on the selected mechanical properties of linear low-density polyethylene
M. Gościański    H. Maciejewski    J. Guliński    H. Leda   
15-22
2022-09-01

The effect of some Diels-Alder adducts of resin acids on the process of epoxy resin curing
F. Mustata    I. Bicu   
108-114
2022-08-23

Molecularly imprinted polymers in pharmaceutical sciences. Part I. The principles of molecular imprinting. Applications in drug synthesis and drug delivery systems
P. Luliński   
799-805
2010-12-30

Biodegradation of poly(ethylene terephthalate) modified with polyester "Bionolle®" by Penicillium funiculosum
B. Nowak    J. Pająk    S. Łabużek    G. Rymarz    E. Talik   
35-44
2011-01-30

A new method of curing epoxy resin by using bis(heptaphenylaluminosilsesquioxane) as a hardener
D. Chmielewska    M. Barczewski    T. Sterzyński   
270-275
2013-04-30

Poly(butylene terephthalate)/carbon nanotubes nanocomposites. Part I. Carbon nanotubes functionalization and in situ synthesis
E. Piesowicz    I. Irska    M. Bratychak    Z. Rosłaniec   
680-685
2015-12-30

Polymeric materials in sustainable development – from the need to use to the need for wear Part II. Return to monomers
Jacek Kijeński   
740-750
2021-01-12

The autocatalytic model of photopolymerization of dimethacrylates
E. Andrzejewska    B. Bogacki    M. Andrzejewski   
549-551
2022-09-19

Carboxymethylcellulose derivatives with low hydrophilic properties
G. O. Machado    A. M. Regiani    A. Pawlicka   
273-279
2022-09-17

Polymeric sorbents and membranes in the biological and environmental samples' preparation for analysis (in English)
P. P. Wieczorek   
409-417
2022-09-01

Application of the 27Al NMR spectroscopy to studies of mechanisms of cyclic esters polymerization
A. Kowalski    M. Florczak    J. Libiszowski    K. Majerska    A. Duda   
722-729
2022-08-26

Application of corona treatment to modify the surface layer of textile polimer materials. Analysis of the issue, design of equipment, and preliminary studies
S. Brzeziński    M. Żenkiewicz    S. Połowiński    D. Kowalczyk    I. Karbownik    S. Lutomirski    G. Malinowska   
421-429
2022-08-18

Effect of "core-shell” polymeric nanofiller on the structure and properties of polylactide and thermoplastic corn starch blend
R. Jeziórska    A. Szadkowska    B. Świerz-Motysia    J. Kozakiewicz   
354-363
2012-05-30

Preparation and properties of polyurethane/functionalized multi-walled carbon nanotubes rigid foam nanocomposites
M. M. A. Nikje    A. Yaghoubi   
776-782
2014-12-30

Computer simulations of cellular injection moulding process
P. Palutkiewicz   
132-143
2015-02-28

Registration of polymers according to the REACH Regulation
A. Bańkowska    M. Palczewska-Tulińska    A. Krześlak   
49-56
2021-01-24

Parametric numerical model for predicting mechanical properties of structures made with FDM technology from polymeric materials
R. Szczesiak    M. Kowalik    M. Cader    P. Pyrzanowski   
626-632
2021-01-13

Influence of accelerated weathering on mechanical and thermomechanical properties of poly(lactic acid) composites with natural waste filler
Mateusz Barczewski    Jacek Andrzejewski    Danuta Matykiewicz    Agnieszka Krygier    Arkadiusz Kloziński   
119-126
2021-01-12

Thermal and mechanical properties of PLA/ENR thermoplastic vulcanizates compatibilized with tetrafunctional double-decker silsesquioxanes

Sandra Paszkiewicz    Grzegorz Kramek    Konrad Walkowiak    Izabela Irska    Elżbieta Piesowicz    Monika Rzonsowska    Beata Dudziec    Mateusz Barczewski   
593-606
2024-01-04

Synthesis and characterization of condensed Schiff bases and their iron salts with aldamine

Chao Meng    professor gu    Jianfa Wang    Jinyong Sui    Shaokai Hu    Susu Zhang    Xiaoyi Zhang    Peiyao Li    Wenjin Liu    Yifan Hu   
99-105
2023-03-10

Studies of the viscoelastic properties of selected polymer systems by the dynamic mechanical analysis
M. Kurcok    P. Szewczyk   
637-642
2022-09-18

Mechanism of the cationic ring opening polymerization of cyclosiloxanes - interpretation of new results
M. Cypryk    J. Chojnowski    K. Kaźmierski    J. Kurjata   
491-497
2022-09-01

Application of spectroscopic methods for investigation of the course of poly(sodium acrylate) crosslinking with use of different crosslinking agents
B. Grabowska    M. Holtzer   
531-536
2022-08-23

Analysis of the copolymer composition based on the simulation of small reaction systems

Jaromir Lechowicz   
13-19
2022-01-17

New aromatic polyesteramides: synthesis and properties
I. Sava   
263-270
2011-04-30

Thermal and fire retardant properties of polyurea
T. Mariappan    C. A. Wilkie   
371-384
2013-05-30

Influence of the addition of chitin nanocrystals on the characteristics of cellulose acetate films
Preethi Ravikumar    Suresh Sagadevan   
98-104
2021-02-17

Thermal stability and mechanical properties of hybrid materials based on nitrocellulose grafted by aminopropylisobutyl polyhedral oligomeric silsesquioxane
X. Yang    Y. Wang    Y. Li    Z. Li    T. Song    X. Liu    J. Hao   
576-587
2021-01-15

The use of biodegradable polymer as an alternative raw material for the production of new ecopolyol
Joanna Paciorek-Sadowska    Marcin Borowicz    Marek Isbrandt    Łukasz Grzybowski    Bogusław Czupryński   
667-671
2020-12-16

Mathematical analysis of burning process of polyester compositions using Numajiri—Furukawa method
M. Pofit-Szczepańska    M. Półka   
545-548
2022-09-17

Influence of diluents and solvent on stability of water dispersion of poly(vinyl chloride) - plastisol dispersion
E. Makarewicz    K. Uziałło    K. Jańczak   
863-873
2022-08-26

Syntheses of new poly(ester-carbonate-urethane)s based on trimethylene carbonate (TMC) and polyester polyol deriv Syntheses of new poly(ester-ed from dimerized fatty acid
M. Paturej    M. El Fray   
611-617
2022-08-18

The influence of intramolecular cyclization and intermolecular cross-linking on the properties of polimeric networks obtained in the radical polimerization of multifunctional methacrylates
M. Podgórski    J. Księżopolski   
518-523
2010-08-30

Polyurethane composites with different matrices filled with glass microspheres
J. Ryszkowska    M. Zieleniewska    A Bryśkiewicz    K. Mizera    M. Chrząszcz    D. Kozon    K. Lipert   
11-18
2021-01-15

Accuracy analysis of the CAD models reproduction for polymers parts, produced using additive manufacturing at manufacturing process based on Industry 4.0 convention
Maciej Cader    Małgorzata Zaborniak    Michał Stączek   
436-441
2021-01-12

Nanocomposite starch graft copolymers with carbon nanotubes – synthesis and flocculation efficiency
Beata Schmidt   
226-231
2020-12-15

Novel multicomponent functionalized biopolymers with enhanced thermal and dielectric properties
Sanjeeta Rani    Syed Kashif Ali    Pawan Kumar    Kunwar Sugam Anugrah    Laishram Saya    Geetu Gambhir    Drashya Gautam    Sunita Hooda    Manisha Verma   
386-395
2023-09-28

Method of estimation of efficiency of quasi-cutting of recycled opto-telecommunication pipes
J. Flizikowski    M. Macko   
53-59
2022-09-19

Unsaturated polyester resins according to European Union requirements
E. Kicko-Walczak    P. Jankowski   
747-756
2022-09-01

Graft copolymerization of methyl acrylate onto sodium alginate initiated by potassium diperiodatocuprate(III)
Y. H. Liu    Y. Li    L. Yang    Y. Liu    L. Bai   
37-42
2022-09-01

Influence of chemical structure on the values of free surface energy of the coatings made of poly(urethane-siloxane) copolymers
P. Król    Ł. Byczyński   
808-816
2022-08-23

Poly(vinyl chloride)/nanoclay nanocomposites - electrical and mechanical properties
O. I. Dimitry    W. M. Sayed    A. M. Mazroua    A. L. Saad   
8-14
2009-01-10

Urethane oligomers with a carbazole ring and azo group
R. Lubczak   
597-600
2011-08-30

Preparation of functionalised SiO2/F-SF poss hybrid fillers and their application in gel polymer electrolytes
K. Szwarc-Rzepka    M. Walkowiak    M. Osińska-Broniarz    M. Dutkiewicz    H. Maciejewski    T. Jesionowski   
748-758
2013-10-30

The influence of materials dosing order and shear forces on the properties of high density polyethylene/ground tire rubber blends obtained in co-rotating twin screw extruder
K. Formela    M Cysewska    J. Haponiuk   
324-332
2014-04-30

Preparation and characterization of halogen-free flame retardant MCA core-shell microcapsules coated with melamine or acrylic acid resin
Xiaoyi Zhang    Zheng Gu    Jinyong Sui    Zhenxu Li Zhenxu Li    Lining Song    Lina Yang    Ning Wang    Jie Zhao   
245-252
2021-05-07

Application of a multicriterial optimization to the resolution of X-ray diffraction curves of semicrystalline polymers
M. Rabiej   
821-833
2021-01-15

The effect of methods of surface treatment of metal elements on their surface free energy, with a view to the formation of polymer–metal hybrid elements
Oliwia Trzaska    Roman Wróblewski    Alina Czekaj    Joanna Czyż    Jacek W. Kaczmar   
816-821
2020-12-17

The cure kinetics of CTBN-modified epoxy system
W. Jae-Young    S. Mi-Ja    K. Sang-Wook   
36-40
2022-09-21

The phase structure and relaxation phenomena in blends of a poly(ether-ester) elastomer with a liquid crystalline polyester
J. Majszczyk    Z. Rosłaniec    D. Pietkiewicz    T. Pakuła   
34-42
2022-09-18

Gamma irradiation effects on impact strength and thermal properties of SBR-toughened polystyrene
W. Brostow    V.M. Castano    J. Horta    G. Martinez-Barrera   
9-14
2022-09-01

Modifiers applied in polymer recycling: processing, properties and application
R. Jeziórska    B. Świerz-Motysia    A. Szadkowska   
748-756
2010-10-30

Synthesis, thermal and performance properties of poly(urethane-dimethylsiloxane) anionomers. Part II. Thermal and performance properties
Ł. Byczyński    P. Król   
263-269
2013-04-30

Experimental verification of computer model for polymer plastication process in injection molding
J. Iwko    R. Steller    R. Wróblewski    J. Kaczmar   
644-656
2015-10-30

Effect of plasticizer with silanol groups on the structure and properties of polylactide and thermoplastic corn starch blend
A. Szadkowska    R. Jeziórska    M. Żubrowska    E. Spasówka    P. Rościszewski   
683-692
2021-01-24

The use of gas chromatography for the determination of radiolytic molecular hydrogen, the detachment of which initiates secondary phenomena in the radiation modification of polymers
Wojciech Głuszewski   
697-702
2021-01-12

Effect of copper chelate of pyridineanilide modified montmorillonite on the flammability and thermal stability of polypropylene
M. A. Nour    M. M. Hassanien   
371-373
2022-09-01

Evaluations of corrections in rheometric measurements of polyethylene. Part I, Slippage at channel wall
A. Kloziński    T. Sterzyński   
583-590
2022-08-26

Selected properties of polypropylene composites with shungite
M. Żenkiewicz    J. Richert    P. Rytlewski    K. Moraczewski    M. Stepczyńska   
119-126
2020-02-28

Graphite oxide as an intumescent flame retardant for polystyrene
M. Kędzierski    P. Jankowski    G. Jaworska    A. Niska   
347-353
2012-05-30

Evaluation of the physico-mechanical and electrical properties of styrene-butadiene rubber/aluminum powder and styrene-butadiene rubber/cerium sulfate composites
A. Nassar    A. A. Yehia    S. H. El-Sabbagh   
100-108
2015-02-28

The properties of elastomers obtained with the use of carboxylated acrylonitrile-butadiene rubber and new crosslinking substances
M. Gaca    M. Zaborski   
31-38
2021-01-24

Mechanical properties and biodegradability of flax fiber-reinforced composite of polylactide and polycaprolactone
P. Rytlewski    M. Stepczyńska    K. Moraczewski    R. Malinowski    B. Jagodziński    M. Żenkiewicz   
603-610
2021-01-13

Synthesis and characterization of UV-cured poly(siloxane-urethane) elastomers containing polyethylene oxide segments – as potential membrane materials
Janusz Kozakiewicz    Jarosław Przybylski    Krystyna Sylwestrzak   
100-110
2021-01-12

Durability of chain transmission obtained using FFF technology
Grzegorz Budzik    Tomasz Dziubek    Bartłomiej Sobolewski    Karol Borek    Małgorzata Gontarz   
617-624
2023-11-27

Investigations of the ultrasounds velocity and its relation to the heterophase structure of multiblock elastomers consisting of poly(butylene terephthalate) and poly(1,2-oxypropylene) or dimerized fatty acid
F. Lembicz    M. El Fray   
630-636
2022-09-18

Photoinduced properties of polyesterimides containing azobenzene groups
E. Schab-Balcerzak   
524-533
2022-08-30

New aromatic polyamideimides - syntheses and thermal and photoluminescent properties
E. Grabiec    E. Schab-Balcerzak    M. Czaja    S. Bodył    Ł. Grobelny    K. Kurcok   
425-432
2022-08-23

Influence of FFF process parameters and macrostructure homogeneity on PLA impact strength
Michał Bączkowski    Dawid Marciniak    Marek Bieliński   
480-483
2021-09-15

Comparative analysis of the deformation characteristics of biodegradable polymers considered as a material for vascular stents
M. Bartkowiak-Jowsa    R. Będziński    J. Chłopek    J. Filipiak    B. Szaraniec   
224-231
2011-03-30

Effect of modifiers on the flammability and physical properties of polyamide 6
K. Kelar    B. Jurkowski    K. Mencel   
365-370
2013-05-30

A new method of styrene-butadiene rubber curing using in situ generated Lewis acids
P. Dmowska-Jasek    W. M. Rzymski    E. Koścista    K. Bociong   
742-746
2015-12-30

Synthesis and characteristics of mesoporous aluminosilicate materials for modification of polymers
D. Czycz    J. R. Grzechowiak    J. Pigłowski   
824-830
2021-01-24

Functionalization of mesoporous SBA-15 silica by grafting of polyvinylamine on epoxy-modified surface
A. Wach    P. Natkański    M. Drozdek    B. Dudek    P. Kuśtrowski   
516-524
2021-01-15

MuCell® and InduMold technologies in production of high quality automotive parts from polymer materials
M. Szostak    P. Krzywdzińska    M. Barczewski   
145-152
2021-01-13

PET/Cloisite®15A composite fibers – studies on the structure and the flame inhibition mechanism
Janusz Fabia    Andrzej Gawłowski    Monika Rom    Czesław Ślusarczyk    Włodzimierz Biniaś    Anna Brzozowska-Stanuch    Michał Puchalski   
622-631
2020-12-16

Modeling of the kinetics of polymerization of dimethacrylates. The kinetic constants vs. termination mechanism
E. Andrzejewska    M. B. Bogucki    M. Andrzejewski    B. Tymińska   
502-513
2022-09-21

Oxidation and degradation of polyethylene cups in hip joint prostheses
J. Kowal    B. Czajkowska    A. Żmihorska-Gotfryd    J. Otfinowski    A. Więcek    A. Wierzbicka    J. Wojewoda   
537-539
2022-09-17

Analysis of the influence of the components of aqueous dispersion of PVC plastisol on its stability
E. Makarewicz    K. Jańczak   
728-736
2022-09-01

Theoretical stress and strain distribution across thick - walled filament wound composite
A. F. Hamed    S. M. Sapuan    M. M. Hamdan    B. B. Sahari   
559-563
2022-08-18

Progress in the studies of the supermolecular structure of segmented polyurethanes
H. Janik   
421-430
2010-06-30

Packaging waste recycling systems — selected legal, organizational and economical problems in Poland
H. Żakowska   
613-619
2012-09-30

Influence of halloysite on the structure, thermal and mechanical properties of polyamide 6
I. Legocka    E. Wierzbicka    T. M. Al-Zahari    O. Osawaru   
24-32
2013-01-30

Effect of UV-VIS radiation on the thermomechanical properties and structure of dyed PLA film
M. Stepczyńska   
385-390
2015-06-30

Mechanical properties of colored acrylonitrile-butadiene-styrene injection molded parts
M. Trzaskalska    P. Palutkiewicz    E. Bociąga   
791-798
2021-01-13

Analysis of dimensional stability of recycled plastic material obtained by grinding
Ali A. Al-Zubiedy   
361-368
2021-01-12

Polypropylene composites with porous and solid structure reinforced with cut fibers
Jolanta Janik   
208-215
2020-12-15

Pyrazole-based photoinitiator with antibacterial activity
Melda Altikatoglu Yapaoz     Sevnur Keskin Dogruyol   
167-172
2024-04-16

Zinc and graphene oxide composites as new protective coatings for oil and gas pipes
M. Sajid Ali Asghar    Muhammad Amir    Umer Hussain    Mohammed M. Sabri   
378-385
2023-10-18

Cyclohexanone-aniline-formaldehyde resins - synthesis and characterization
F. Mustata    I. Bicu   
817-821
2022-09-18

Modification of low density polyethylene with allylurea
A. Wojtala    W. Herzog    K. Czaja   
684-689
2022-09-01

Processing aspects of p-v-T relationship
B. Kowalska   
862-865
2022-08-30

Urethane oligomers with pyrimidine rings
A. Ślączka    J. Lubczak   
760-763
2022-08-24

The kinetic degradation of LDPE films subjected to aggressive environments

Imad Kashi    Ouahida Zeghouan    Karim Moussaceb   
255-260
2022-07-14

Analysis of the formation of starch - hydrocolloid binary gels and their structure based on the relaxation times of the water molecules
H. M. Baranowska    M. Sikora    M. Krystyjan    P. Tomasik   
478-483
2011-06-30

Thermal and dielectric properties of silsesquioxanes containing mesogenic azo groups
B. Mossety-Leszczak    M. Włodarska    H. Galina    M. Dutkiewicz   
733-740
2013-10-30

Thermal and mechanical properties of poly(L-lactic acid) nucleated with N,N’-bis(phenyl) 1,4-naphthalenedicarboxylic acid dihydrazide
Li-Sha Zhao    Jun Qiao    Wei Chen    Yan-hua Cai   
234-244
2021-05-07

Inhibitors of thermally induced burn incidents – the examinations of the flammability, TGA, SAXS and SEM methods
A. Pielesz    A. Gawłowski    J. Fabia    C. Ślusarczyk    E. Sarna   
806-811
2021-01-15

Poly(urea-formaldehyde) microcapsules – synthesis and influence of stirring speed on capsules size
P. A. Bolimowski    R. Kozera    A. Boczkowska   
339-346
2021-01-13

New legal regulations on nanoforms of substances in the context of the legal certainty principle
Marcin Jurewicz   
418-422
2022-10-24

A comparison of methods to determination of macromolecule crosslinking yield from gel fraction data - Rapid Communication
A. Shyichuk    G. Tokaryk   
219-221
2022-09-01

Synthesis of organic-inorganic hybrids based on cellulose acetate butyrate
P. Wojciechowska   
845-848
2022-08-18

Composites of recycled oxo-biodegradable foils filled with wood flour
J. Ryszkowska    K. Sałasińska   
740-747
2010-10-30

Polyurethane powder lacquers modified with fluorine compounds
B. Pilch-Pitera   
830-838
2012-12-30

Analysis of sequence distribution in siloxane copolymers to study the mechanism of polymerization of cyclosiloxanes
M. Cypryk   
468-475
2022-09-19

Kinetics of ethylene polymerization over titanium catalyst supported on bimetallic carrier MgCl2(THF)2/AlEt2Cl
W. Ochędzan-Siodłak    M. Nowakowska   
215-218
2022-09-17

Polymerizability of aliphatic cyclic esters
A. Duda    A. Kowalski   
485-495
2022-08-26

Effects of selected injection molding conditions on crack resistance of polypropylene composite with talc
D. Kwiatkowski   
221-226
2009-03-15

Analysis of the usefulness of adenosine triphosphate (ATP) determination and fluorescence microscopy methods for the evaluation of the viability and adesion of bacteria on the surface of bioactive polymers
B. Gutarowska    M. Piotrowska    Z. Żakowska    K. Gwoździński   
236-245
2012-03-30

Wood-polymer composites in moving bed technology
I. Kruszelnicka    D. Ginter-Kramarczyk    M. Michałkiewicz    A. Kloziński    S. Zajchowski    P. Jakubowska    J. Tomaszewska   
739-746
2014-10-30

Poly(butylene terephthalate/carbon nanotubes nanocomposites. Part II. Structure and properties
E. Piesowicz    I. Irska    K. Bryll    K. Gawdzińska    M. Bratychak   
24-30
2021-01-24

Formulation of nimesulide-loaded polylactide/poly(lactic-co-glycolic acid) nanoparticles and the evaluation of release kinetics
A. Pobudkowska    K. Nosol    P. Gierycz    U. Domańska   
586-593
2021-01-13

Experimental analysis on the technical behavior of carbon black filled rubber blends’ rollers for rice husk removal application
Prabhakaran Paramasivam    Rajesh Ranganathan    Rajasekar Rathanasamy    Gobinath Velu Kaliyannan    Sathish Kumar Palaniappan    Samir Kumar Pal    Moganapriya Chinnasamy   
50-55
2021-01-12

Synthesis and characterization of modified PVC waste with different diamines for Hg(II) removal
Ameen Hadi Mohammed    Ameera Hassan Hamed    Areej Kamal Assim Aldabbagh   
640-645
2023-12-14

Production and characterization of polyurethane/expanded graphite composites for industrial food preservation
Tuğba Güngör Ertuğral   
589-595
2023-01-11

Star-shaped and markedly branched polyethers and polyesters
P. Penczek    T. Biela    G. Łapienis   
600-610
2022-09-18

Mathematical model of friction wear process on the example of polymer composites on the basis of phenol-formaldehyde resins
A.O. Tretyakov   
264-267
2022-09-01

X-Ray diffuse scattering investigation of polytetrafluoroethylene surfaces
Ch. Gravalidis    S. Logothetidis   
359-364
2022-08-30

Elastomeric styrene-isoprene-styrene (SIS) block copolymer modified with a borone derivative as compatibilizer for PE-LD/PS an PP/PS mixtures
E. Wierzbicka    I. Legocka   
211-217
2011-03-30

Flame retardant and thermal behavior of polylactide/expandable graphite composites
P. Wei    S. Bocchini    G. Camino   
361-364
2013-05-30

Water-blown polyurethane-polyisocyanurate foams based on bio-polyols with wood fibers
M. Kurańska    A. Prociak    U. Cabulis    M. Kirpluks   
705-712
2015-12-30

Assessment of degree of conversion of polymer-based orthodontic adhesive resins
D. Kuśmierczyk    M. Czerwiński    M. Tykarska    K. Małkiewicz   
466-471
2021-01-15

The use of photogrammetry in improving quality of workpieces after an injection molding process
M. Wieczorowski    B. Gapiński    M. Grzelka    M. Szostak    M. Szymański   
134-144
2021-01-13

Advances in supported metallocene catalysis
J. T. Tait    G. K. M. Monterio    M. Yang    J. Richardson    R. Ediati   
314-322
2022-09-21

Modulated temperature DSC studies on the phase transitions of poly(ethylene oxide). Effect of temperature step
K. Pielichowski    K. Flejtuch   
455-457
2022-09-17

Selected properties of elastoionomers prepared by reactive processing
A. Smejda-Krzewicka    W. M. Rzymski   
663-669
2022-09-01

Electrically conductive polymeric composites as potential sensor materials
S. Frąckowiak    M. Kozłowski   
390-398
2010-05-30

Modification of polyamide 6 with halloysite nanotubes
K. Kelar    J. Olejniczak    K. Mencel   
18-23
2013-01-30

Synthesis of polystyrene-b-polyurethane-b-polystyrene copolymers through ARGET ATRP polymerization method. Part II. Chemical structure, thermal and surface properties
P. Król    P. Chmielarz   
377-384
2015-06-30

Milled basalt fibers as reinforcement for polyurea composite spray coatings with improved thermomechanical stability and mechanical performance
Mateusz Barczewski    Kinga Biedrzycka    Olga Mysiukiewicz    Danuta Matykiewicz    Jacek Andrzejewski    Arkadiusz Kloziński    Marek Szostak   
184-195
2020-12-15

Influence of the preparation method on selected properties of PLA nanofibers modified with lavender oil
Tuğba Güngör Ertuğral   
112-116
2024-03-27

Preparation and characterization of poly[2-(4-pentenoyloxy)ethyl methacrylate]
R. Jantas    Z. Draczyński   
813-816
2022-09-18

The universal temperature parameter of rigid PVC gelation in Brabender kneader
K. Piszczek    J. Tomaszewska    T. Sterzyński   
646-648
2022-09-01

Application of multicriterial analysis for selection of polymeric seals in hydraulics
W. Okularczyk   
747-753
2022-08-30

Fatigue life of Epidian 57 plastic
J. Godzimirski    A. Komorek    M. Rośkowicz   
737-742
2022-08-24

A new polysaccharide-based ion-exchange resin for industrial wastewater treatment
Savita Bargujar    Geetu Gambhir    Madhu Bala Raigar    Sunita Hooda    Dinesh Kumar Arya    Mamta Bhatia   
212-219
2022-06-21

Durability of Belzona 1111 and Belzona 1812 adhesive composites
M. Rośkowicz    T. Smal   
471-477
2011-06-30

Hydroxypropylcellulose-graft-poly(N-isopropylacrylamide)—novel water-soluble copolymer with double thermoresponsivity
M. Motyl    D. Drozd    K. Kamiński    D. Bielska    A. Karewicz    K. Szczubiałka    M. Nowakowska   
696-702
2013-09-30

Changes in thermal properties of isotactic polypropylene with different additives during aging process (in English)
A. Brzozowska-Stanuch    S. Rabiej    J. Fabia    J. Nowak   
302-307
2014-04-30

Structure and thermal properties of microcrystalline cellulose extracted from coconut husk fiber
Nur Athirah Abdullah    Muhammad Hanif Sainorudin    Mohd Saiful Asmal Rani    Masita Mohammad    Nurul Huda Abd Kadir    Nilofar Asim   
187-192
2021-04-13

Analysis of copper content in the poly(phenylene oxide) production process streams
D. Kolasa    W. Ratajczak    M. Talma-Piwowar    J. Krakowiak    E. Majewska    K. Polarczyk   
290-296
2021-01-13

Reversible endothermic process observed by dsc in thermoplastic multiblock elastomers at middle temperature range
R. Ukielski    A. Kozłowska   
809-815
2022-09-17

Polyoxymethylene-based nanocomposites with montmorillonite: an introductory study
K. Pielichowski    A. Leszczyńska   
143-149
2022-08-30

Effect of flame retardants on thermal stability and flammability of cured nitrile rubber
P. Rybiński    G. Janowska   
833-839
2022-08-18

Waste polymers - an available and perspective raw materials for recycling processes
P. Rejewski    J. Kijeński   
711-717
2010-10-30

Influence of poly(3-hydroxybutyrate) addition on the properties of poly(lactic acid) nonwoven obtained by the melt-blown technique
M. Łatwińska    J. Sójka-Ledakowicz    M. Kudzin   
486-491
2015-08-30

Hydroxy functionaliaHydroxy functionalized porous polymer particles derived from mixtures of hydrophilic and hydrophobic monomerszed porous polymer particles derived from mixtures of hydrophilic and hydrophobic monomers
A. Bukowska    W. Bukowski    S. Kleczyńska    K. Dychtoń    M. Drajewicz   
616-625
2021-01-24

The structure and properties of viscoelastic polyurethane foams with FyrolTM and keratin fibers
M. Zieleniewska    J. Ryszkowska    A. Bryśkiewicz    M. Auguścik    L. Szczepkowski    A. Świderski    K. Wrześniewska-Tosik   
127-135
2021-01-15

Influence of UV aging on some rheological properties of footwear leather
Wioleta Serweta    Justyna Wójcik    Joanna Rutowicz    Zbigniew Olejniczak   
617-624
2021-01-12

A literature survey of the influence of preform reheating and stretch blow molding with hot mold process parameters on the properties of PET containers. Part I
Paweł Wawrzyniak    Waldemar Karaszewski   
346-356
2020-12-15

The synthesis of epoxy monomers with mesogenic groups
B. Mossety-Leszczak    P. Wojciechowski    H. Galina    J. Ulański   
374-376
2022-09-19

The influence of blowing extrusion process of PA film on its structure and physical properties
J. Stasiek    E. Piórkowska    A. Gałęski   
194-203
2022-09-17

Gradient structure of polymer materials
D. M. Bieliński    M. Kajzer    L. Ślusarski    Ł. Kaczmarek   
298-304
2022-09-01

Structure and properties of polyurethane/YAG:Tb3+ nanocomposites with luminescence properties
J. Ryszkowska    E. Zawadzak    D. Hreniak    W. Stręk    K. J. Kurzydłowski   
340-344
2022-08-26

Non-uniform phase structure in immiscible polymer blends - reasons and consequences
I. Fortelný    M. Lapčíková    F. Lednický    Z. Starý    Z. Kruliš   
139-144
2009-02-12

Characteristics of silica nanopowders and sol containing immobilized nanoparticles of copper or silver
M. Zielecka   
765-768
2011-10-30

Effect of heating temperature on rheological properties of inulin gels
P. Glibowski    A. Kulik    A. Masternak   
111-116
2012-02-28

Characterization of maleated vegetable oils for insulation purposes and agricultural applications
M. A. Saied    S. H. Mansour    A. A. Ward    I. S. Rahim    H. A. Zayed    A. L. Saad    K. N. Abdel Nour   
729-738
2014-10-30

Analysis of the polymeric abrasive paste regeneration for abrasive flow machining
Agnieszka Nowacka    Tomasz Klepka   
426-431
2021-09-04

Geometric analysis of injection-molded polymer gears (Rapid communication)

Jadwiga Pisula   
56-62
2021-01-20

The effect of anionic surfactant – polyvinylpyrrolidone complexes formed in aqueous solutions on physicochemical and functional properties of shampoos
M. W. Sułek    J. Janiszewska    K. Kurzepa    B. Mirkowska   
549-556
2021-01-13

Physicochemical and functional pro­perties of polymer biocomposites
Maria Wiśniewska-Wrona    Mirosława El Fray   
23-33
2021-01-12

Synthesis and characterization of ammonium polymer for anion removal in aqueous solutions
Aster Rahayu    Dhias Cahya Hakika     Nafira Alfi Zaini Amrillah    Veranica Veranica   
537-543
2023-11-13

Vitamin E-loaded polymeric nanoparticles from biocompatible adipate-based copolymer obtained using the nanoprecipitation method
Martyna Sokołowska    Maja Marchwiana    Miroslawa El Fray   
543-551
2022-11-30

Penetration of polydimethylsiloxanes (PDMS) to nervous tissue of rats
J. Łukasiak    D. Jachowska    Z. Jamrogiewicz    J. Morys    M. Prokopowicz    K. Czarnobaj    B. Falkiewicz   
567-568
2022-09-18

Application of epoxy resins in electronics and optoelectronics. Part 1. Mechanical properties and thermal stability of epoxy resins used for encapsulation of electronic devices
W. Mazela    P. Czub    J. Pielichowski   
233-239
2022-09-01

The analysis of visibility range in smoke generated during combustion of polyester materials
M. Konecki    M. Półka   
293-300
2022-08-30

Coating materials obtained from polyurethane cationomers modified with functionalized silsequioxanes. Part II. Practical properties
B. Król    P. Król   
855-862
2010-12-30

Polystyrene with reduced flammability containing halogen-free flame retardants
P. Jankowski    M. Kędzierski   
342-349
2013-05-30

Silver nanoparticles in isotactic polypropylene. Part II. Molecular modelling of polypropylene chains arrangement on the surface of silver nanoparticles
D. Hybiak    S. Chmielewska    J. Garbarczyk   
700-704
2015-12-30

Evaluation of the effect of N,N’-bis(1H-benzotriazole) dodecanedioic acid acethydrazide on poly(L-lactic acid)
Y. H. Zhang    L.-S. Zhao    Y.-H. Cai   
773-779
2021-01-24

Analysis of swelling degree and gel fraction of polylactide/poly(butylene adipate-co-terephthalate) blends crosslinked by radiation
R. Malinowski    K. Janczak    K. Moraczewski    A. Raszkowska-Kaczor   
25-30
2021-01-13

Thermal and surface properties of fibers made from fiber-forming gelatin-g-polyacrylonitrile grafted copolymers
W. Wybór    M. Zaborski    A. Włochowicz    C. Ślusarczyk   
172-177
2022-09-21

Preparation and characterization of low density polyethylene nanocomposites with modified montmorillonite clay
M. Nour    M. Elgazery    W. Awad    M. Amer   
536-540
2022-08-18

Ocena wpływu biodegradacji na strukturę chemiczną polieterouretanów
A. E. Stępień   
545-550
2012-08-30

The release of biologically hazardous chemical compounds from orthodontic adhesive systems used in Europe and in the USA — an in vitro study
K. Małkiewicz    P. Wychowański    E. Małkiewicz    D. Olczak-Kowalczyk    J. Turło   
309-315
2015-05-30

Analysis of polymeric nanofiltration membranes by modern techniques
A. Kowalik-Klimczak    A. Bednarska    M. Grądkowski    P. Gierycz   
339-346
2021-01-24

Thermal degradation kinetics of poly(propylene succinate) prepared with the use of natural origin monomers
P. Parcheta    I. Koltsov    E. Głowińska    J. Datta   
700-707
2021-01-13

Characteristics of photocurable acrylic resins for use in wood industry
Magdalena Jurczyk-Kowalska    Magdalena Płocińska    Emilia Choińska    Andrzej Zagórski   
340-347
2021-01-12

Effect of fiber orientation and fiber loading on the mechanical and thermal properties of sugar palm yarn fiber reinforced unsaturated polyester resin composites
N. Mohd Nurazzi    A. Khalina    M. Chandrasekar    H.A. Aisyah    S. Ayu Rafiqah    R.A. Ilyas    Z.M. Hanafee   
115-124
2020-12-15

Mechanical and thermal properties of rigid PVC and graphene nanocomposites obtained by melt–mixing
Sławomir Wilczewski    Katarzyna Skórczewska    Jolanta Tomaszewska    Krzysztof Lewandowski    Ömer Faruk Şentürk   
86-91
2024-03-07

Effect of ricinol-2-oxazoline methylmaleate on the structure and properties of polyamide 6 and low density polyethylene blends
R. Jeziórska   
623-633
2022-09-01

Functionalization of multihydroxyl branched poly(3-ethyl-3-hydroxymethyloxetane). Synthesis of star poly(ethylene oxide)
M. Bednarek   
727-734
2022-08-30

Evaluation of surface roughness parameters of anatomical structures models of the mandible made with additive techniques from selected polymeric materials

Rapid communication

Paweł Turek   
162-167
2022-04-27

Review of the most important methods of controlled radical polymerization (CRP). Part II. CRP with atom transfer and its industrial applications
P. Król    P. Chmielarz   
429-438
2011-06-30

The influence of screw configuration and screw speed of co-rotating twin screw extruder on the properties of products obtained by thermomechanical reclaiming of ground tire rubber
K. Formela    M Cysewska    J. Haponiuk   
170-177
2014-02-28

Crystallization and melting behavior of poly(L-lactic acid) modified with salicyloyl hydrazide derivative
Y.-H. Cai    L. Tian    Y. Tang   
734-742
2021-01-15

Application of poly(vinyl chloride) modified with β-amino alcohols derived from limonene oxide for removal of hazardous metal ions
F. Brahmi    F. Meganem    A. Bel Hadj Amor   
283-289
2021-01-13

Effect of manufacturing technique on material homogeneity of an implant made of polyetheretherketone
Wiktoria Wojnarowska    Sławomir Miechowicz    Tomasz Kudasik   
771-775
2020-12-17

Cone calorimetric studies on the mechanism of action of new fire-retardants used for polyester resins
E. Kicko-Walczak   
808-813
2022-09-21

The influence of chemical composition of amide block on the thermal properties and structure of terpoly(ester-b-ether-b-amide) elastomers
R. Ukielski    R. Piątek   
690-694
2022-09-17

Thermal analysis of swollen sulfur vulcanizates of butadiene-acrylonitrile rubber
G. Janowska    L. Ślusarski    P. Rybiński   
196-200
2022-09-01

Determination of residual tin in synthesized aliphatic biomedical polyesters by electrothermal atomic absorption spectroscopy
M. Sobczak    K. Żółtowska    A. Jaklewicz    W. Kołodziejski   
674-680
2010-09-30

Waterborne polyurethane cationomers synthesized from 4,4’-methylenebis(phenyl isocyanate) or isophorone diisocyanate, polyesters and N-methyl or N-butyldiethanolamine — analysis of the structure and selected properties of the obtained coatings
P. Król    B. Król   
799-811
2012-12-30

1 - 300 of 421 items 1 2 > >> 
Łukasiewicz Research Network – Industrial Chemistry Institute
ul. Rydygiera 8,
01-793 Warszawa
email: polimeryjournal@ichp.lukasiewicz.gov.pl
tel. +48 22 633 98 04
Links:
https://ichp.lukasiewicz.gov.pl
https://lukasiewicz.gov.pl
About:
Copyright 2019 by Łukasiewicz Research Network – Industrial Chemistry Institute
OJS Support and Customization by LIBCOM
Platform & workfow by OJS/PKP